 Tracks & Channels |
 Track |
| Guides - Sliders - Rollers |
| Channels |
| Polished Aluminium Channels |
| Aluminium Extrusions |
| U-Channels |
| Angles |
| Plastic Extrusions |
| Table Edgings |
| Angles |
| Compartment Trunking |
| Screen Joiner Profiles |
|
|
|
Tracks |
 |
Tray Slides, Table Leaf Guides, Door Drip Bars and of course Sliding Door Tracks are just a few of the applications these P.V.C. extrusions have successfully fulfilled.
Stocked in 2 Metre Lengths or 30 Metre coil in the case of the 1a. |
|
|
| Guides - Sliders - Rollers |
No.1 Sliders are designed for use with the Nos. 1 and 3 Tracks and take doors up to 7Kg.
No.2 are for use with Nos. 2 and 4 Track and take doors up to 12 Kg
Rollers are used with Nos 2 and 4 Track and will carry up to 20Kg. Per Roller.
No. 86 Rollers are for mortising into the bottom of the door and No. 1450 For mortising into the rear of the door.
Nos. 42 and 44 Guides have a 6mm pin whilst 43 and 45 have 8mm pins. |
 |
|
|
| Channels |
 |
A range of single and double P.V.C. channels for use with 4mm, 6mm and 10mm, panels or with the guides shown above.
Stocked in 2 metre lengths |
|
|
| Polished Aluminium Channels |
With a groove width of 7.4mm the Nos. 38 and 39 single channel and Nos, 34 and 35 double channels are ideally suited for use in showcases where an economic price is desired without sacrificing quality.
The outside legs are polished to enhance the appearance of the channel.
The top channel is just aluminium whilst the bottom channel carries a plastic insert to reduce friction. |
 |
|
|
| U-Channels |
Aluminium U-Channels Available in 5 Metre Lengths. Two Lengths per pack.Other sizes available.
Finishes:
Raw
Sanded Polished Chrome Plated
White Powder Coated RAL9010
Silver Anodised
Gold Anodised
Dark Bronze Anodised
Other colours available on request.
Angles
Aluminium Angles Available in 5 Metre Lengths. Two Lengths per pack. Other sizes available.
Finishes:
Raw
Sanded Polished Chrome Plated
White Powder Coated RAL9010
Silver Anodised
Gold Anodised
Dark Bronze Anodised
Other colours available on request. |
 |
|
|
| Table Edgings |
A range of flexible P.V.C. T-edgings designed to give a colourful and protective edge to most popular sizes of board.
Easily fitted to pre-routed grooves.
Tongues are approximately 3.5 mm thick and 8 mm deep.
Wide range of colours to suit your project.
Available in 16mm, 19mm, 25mm & 27mm widths. |
 |
|
|
| Angles |
Angles are ideal to protect exposed corners from unsightly knocks, chips and scratches.
Heavy enough for structural applications.
A fast, cost effective way to provide a neat protective edge.
Extruded to close tolerances in rigid P.V.C. using high grade materials.
This range has many potential uses.
Available in 25 mm, 31 mm, 63 mm. Special colours and lengths available on request. |
 |
|
|
| 3 Compartment Trunking |
A rigid cable management profile specifically designed to conceal and carry Telephone, Computer and power cables in separate channels.
Stock Colours:
Brown
Grey
Stock Lengths:
2metres |
|
|
|
| Screen Joiner Profiles |
Rigid P.V.C. screen edge profiles combined with flexible dumbell sections.
Together they provide a simple but effective method of joining office and display partition screens into unlimited combinations and designs.
Easy to fit:
Simply route grooves in the vertical edges of your panels, cover the panel in the decoration of your choice, fit the screen joiner profile and assemble your panels together with the dumbell sections.
|
 |
Stock Colours:
Screen Edge
Black
Light Grey
Dumbell
Black
Stock Lengths:
Screen Edge
2 metres
Dumbell
50 metres coils
Special Colours and lengths available on request.
|
 |
|
|
